The FQ777 951C adopts 2.4G frequency technology. It can realize headless mode and 3D-flip. Built-in six-axis gyro will promise you a stable flight. Mini size but powerful quadcopter.
3D-flip function brings more fun.
LED assures you to fly in dark place.
Adopt 2.4G remote control technology.
6-axis design promoting flying stability.
With attractive headless mode, completely solving pilot loss-of-orientation problem.
Special design hull with durable light weight ABS material provides more protection.
Color: White and black optional
Controller mode: Mode 2 (left hand throttle)
Channel: 4 Channels
Gyroscope: Six axis
Remote control frequency: 2.4GHz
Function: forward/backward, up/down, left/right, sideward flight, take photo, speed mode, headless mode, 3D-flip
Camera: 0.3MP camera
Remote control distance: About 50m
Charging time: About 35mins
Working time: About 5mins
Transmitter battery: 3 * AAA battery (not included)
Quadcopter battery: 3.7V 150mAh LiPo battery (built-in)
Battery size: 21 * 18 * 5mm
Quadcopter size: 85 * 85 * 25mm
Quadcopter weight: 16g (battery excluded)
Package size: 19.5 * 11.5 * 5.5cm / 7.7 * 4.5 * 2.2in
Package weight: 173g / 6.1oz
Brand gift box package
1 * FQ777 951C Mini RC Quadcopter
1 * Transmitter (mode 2)
1 * USB Charging Cable
1 * Card Reader
1 * 2GB SD card
2 * Pair of Spare Propeller
3 * Pair of Protective Ring
1 * 3.7V 150mAh LiPo battery(built-in)
1 * English Manual
FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6.During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.