The Yizhan i6s adopts 2.4G frequency technology. It can realize headless mode and 3D-flip. Built-in six-axis gyro will promise you a stable flight. Mini size but powerful hexacopter.
Attractive 3D-flip function brings more fun
One-key return function makes it easily find the way home
6-axis gyro ensures more stable flying and be easy to control
2MP camera captures and records every beautiful and unforgettable moment
With headless mode, completely solving pilot loss-of-orientation problem
Controller mode: Mode 2 (left hand throttle)
Channel: 4 Channels
Gyroscope: Six axis
Remote control frequency: 2.4GHz
Function: forward/backward, up/down, left/right, sideward flight, take photo, one-key return, headless mode, 3D-flip, speed mode
Flight duration: About 6mins
Charging time: About 50mins
Control distance: About 50m
Transmitter battery: 2 * AA Battery (not included)
Drone battery: 3.7V 450mAh LiPo battery (built-in)
Hexacopter size: 130 * 130 * 40mm
Hexacopter weight: 40g
Package size: 18 * 18 * 9cm / 7.1 * 7.1 * 3.5in
Package weight: 321g / 11.3oz
Brand gift box package
1 * Yizhan iDrone i6s RC Hexacopter
1 * Transmitter (Mode 2)
1 * 3.7V 450mAh LiPo Battery (built-in)
1 * Charge Cable
3 * Pair of Protective Ring
1 * Pair of Landing Gear
1 * Tool Set
3 * Pair of Spare Prop
1 * Card Reader
1 * 4GB SD Card
1 * English Manual
FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6.During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.