This solar powered night light can charge itself during the daytime. More, equipped with motion sensor, it can light up automatically when the motion is detected. Two working models: full brightness model and lower brightness model.
Solar-powered: charge itself during the daytime, and light up automatically in darkness.
Motion sensor: automatically illuminate when motion is detected within 10-11 feet of the device in the dark with a PIR sensor. And the light will dim after 30 seconds of inactivity.
Two working models: full brightness model and lower brightness model. When the motion sensor detects the movement, the lamp will double the light output. And to save the power, it dims after about 30 seconds to a lower brightness.
Energy saving: no cables, no electricity cost, recharged by solar panel under sunlight.
High-efficiency: efficiently transform solar energy into electrical energy by absorbing sunlight. It can continuously work 6-8 hours after fully charged with about 6 hours in sunlight.
PP housing cover：water-resistant, dust-resistant. Suitable for outdoor using.
Flexible installation: two installation ways, quick, easy.
Solar panel: 2V 0.8W mono-crystalline silicon
Battery: 1pc * N2 size lithium 3.7V 2200mAh
LED quantity: 6LEDs
Luminous flux: 250lm
Light color: Warm white (2800-3000K), white（6000K-6500K) (optional）
Motion sensor: PIR sensor
Charging time: 6 hours
Ingress protection: IP44
Item color: White
Panel size: 8.4 * 8.4cm / 3.30 * 3.30in(L*W)
Item weight: 128g / 4.54oz
Item size: 12 * 12 * 5.5cm / 4.72 * 4.72 * 2.16in(L*W*H)
Package weight: 193g / 6.80oz
Package size: 12.5 * 12.5 * 6.5cm / 4.92 * 4.92 * 2.55in(L*W*H)
1 * solar powered light
1 * set of screws
1 * user manual
Remember to turn the switch to the ON position. To simply test the light, you can cover the solar panel with your hand, then the light will turn on automatically.
Tear off the film on the solar panel before using.
Install the light in an area where it can get enough sunlight.