The FQ777 951W adopts 2.4G frequency technology. It can realize headless mode and 3D-flip. Built-in six-axis gyro will promise you a stable flight. Mini size but powerful quadcopter.
LED assures you to fly in dark place
Adopts 2.4G remote control technology
6-axis design promoting flying stability
Attractive 3D-flip function brings more fun
Using durable light weight ABS material provides more protection
With headless mode, completely solving pilot loss-of-orientation problem
Color: Red and black optional
Controller mode: Mode 2 (left hand throttle)
Channel: 4 Channels
Gyroscope: Six axis
Remote control frequency: 2.4GHz
Function: forward/backward, up/down, left/right, sideward flight, take photo, speed mode, headless mode, 3D-flip
FPV: WiFi FPV
Camera: 0.3MP camera
Flight duration: About 5mins
Charging time: About 35mins
Control distance: About 30m
Transmitter battery: 3 * AAA battery (not included)
Quadcopter battery: 3.7V 150mAh LiPo battery
Quadcopter size: 85 * 85 * 25mm
Quadcopter weight: 16g
Note: There may be some deviation due to manual measurement
Package size: 19.5 * 11.5 * 5.5cm / 7.6 * 4.5 * 2.2in
Package weight: 209g / 7.4oz
Brand gift box package
1 * FQ777 951W RC Quadcopter
1 * Transmitter (Mode 2)
1 * 3.7V 150mAh LiPo Battery
1 * Phone Bracket
2 * Pair of Spare Propeller
3 * Pair of Prop Protector
1 * Charging Cable
1 * Screw Drive
1 * English Manual
FAQ of the aircraft:
1.The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2.One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3.Battery problems (can't be charged, swelling, etc)
Battery damaged, suggested to change a new one.
Check gift box package inside and outside carefully. Contact custom service.
5.The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
6.During the charging, battery and charging cable melt.
This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.