Andoer 38mm Aluminum Screw Knob Mini Quick Release Clamp Compatible with Arca Swiss for 38mm QR Plate

Good, medium quality, for the amateur photographer with a low budget absolutely fine.

What it says in a can ... Easy to install and robust when installing a Swiss arc camera.

Light, well suited to adapt in Arca old kneecaps. Good metal tightening wheel. Good tightening of the Arca trays. It comes with a 1/4 -3 / 8-inch adapter and does not have a security lock like the Sirui MP-20, but the security lock is not the same price (€ 51).

Ok, this is a small thing, but it is a beautifully designed thing. The design is great. The quality is very good. It works very well Impressed - a quality project! When you release the jaws, they open automatically when the spring is loaded. The open jaws are not supported by the pins, but are supported by flat and thick steel bars that are an integral part of the jaws, so there is no need to worry about loosening the element. Between the knob and the jaw there is a copper washer, so this will remain stable for many years, I do not doubt it. Of course, the main point of sale is that it is small and, therefore, very light, with a Swiss swallow Ark on the bottom of the clip so you can hold the clip in another clip, allowing you to grab the camera with your lens feet or add this. Quickly and easily cut and hook the body of the camera on the L-bracket.

I have a new and modern tripod with a quick release mechanism and I wanted to buy only the base for an old tripod, to be able to use the same support that connects to the camera on both tripods. However, you should have purchased a longer base that extrudes from the old tripod head that allows easier control of the tightening knob. But it works well.