Manual Portable Wire Stripping Machine Scrap Cable Peeling Machines Stripper for 1-30mm Hand Tool Can Connect Hand Drill

If you wish to strip a lot of wires, even if it is small, this is a good investment. I can basically sit down and proceed anytime. If I have something that is not very positive, it is that I have not seen the seller replace the blade. This is not what I need, but I am thinking about the future. Still 5 stars

It will definitely take some time to get used to, if you twist the wires too tightly on the smaller strands, it will also cut the strands and it will be painful to clean up because they will be as sharp as needles! It’s too loose, it won’t do anything... I used my drill bit, wow, I’m very impressed, just make sure you install this thing at least well

The person who invented this is simply a genius. I have been waiting for many years for such a robust and easy-to-use tool. When I said that you can use this product if you can flush the toilet, I'm not kidding. It paid for itself within 2 hours. It is better than trying to shave off the outer coating with a razor. The tool scribes the outer coating for easy peeling and removal. I am very impressed with the quality. If your wire is straight, you can even use a drill bit to speed up the process. But be careful. Don't let your children play with this tool. They are easily injured, especially if you take off the protective cover

I have owned many different wire strippers in the past, mostly larger wire strippers with motors. This wire stripper is more convenient and easier to use than my idiot. It is easy to adjust and easy to set up. I have used it for #2 copper wire to #10 stranded copper wire. It works well. As long as it is adjusted correctly and the wires don't have a lot of kinks, this thing is like a champion. No problems have been encountered so far.

This wire stripper works very well, and it is likely to make you twice or more in the scrapyard. Take a moment to adjust the cutter to the position where it just broke through the insulation. I used the drill attachment and fed it all at once. A little bit and make the necessary adjustments, this thing will pull the wire at the speed you want. I also brought a small bristle cleaner, a bit like a toothbrush, but more for cleaning things, and put it under the feed wheel to prevent plastic accumulation, just leave it there when feeding the thread.