DMX512 4CH*4A Decoder LED Controller 4 Channels Driver RGBW LED Strip Light DC12V-24V

THANK YOU SO VERY MUCH FAST DELIVERY NICE PRODUCT

This work. There are many copies there, so it's hard to know which ones are valid. I am still in the prototyping phase, so I can't say that it will continue to work, but it is still so good so far.

Economical DMX controller for many of the LED projects I am developing. However, of the 17 I purchased recently, I have an intermittent Phoenix connector that I will replace. Not happy, but the price you paid for such a cheap driver.

This price is great. It can make 3 DMX512 channels, so it can eliminate 0-255 RGB strips. The option to use rj45 or xlr is a good complement for permanent installations, while the 8 channels are very large, so a total of 24 amps. I bought a 5050 rgb strip with 5 or 16 feet and a combination of 3 channels for 2 amps, so it has a lot of rgb strips. I bought 5 installed in my house and they are being controlled by Arduino. Also, can be used to test red, green, blue, yellow, cyan, magenta, white units, jump 3 jumps 7 faded 3 fade 7 test function and jump and dizziness is adjustable speed. These modes are not controllable through DMX, which is a shame, not through DMX, which is a shame output mode, but at the end of the day it doesn't really mean type controllers, decoders / DMX receivers. Please note that this box has a 3a channel and a 8th channel version.

For the price of the decoder, I think there will be some dimming/mixing problems. I'm wrong. The decoder works well. I am using the XLR side to communicate with my board. Empty XLR connectors are great, but they are not used.