High Precision P1-GYRO 3-Axis Flight Controller Stabilizer System Gyro For Fixed Flying Wing Airplane FPV

This entry has some undocumented receiver limitations. It works well in a hobby receiver, but when it flies in the air, movies often appear on the surface, so I don't trust flying. In Rx, the control is sometimes not set to neutral after initialization. This usually shows, and I disconnected and initialized again without problems. I still use it on a wing with a gopro camera.

I followed the instructions, and it hit the control surface back and forth with good control.

In AVCD (normal function) mode, there is no need to make too much sensitivity adjustment, and the ailerons will not vibrate. This is good.

Attempts have been made on conventional wings with lift, rudder and ailerons, as well as flight wings with electronic aircraft only. There were no power issues when trying to control multiple surfaces multiple times.

The cost of cc3d is almost the same, as is the price it brings. Can it be used for future projects?