Original XK Falcon K100 6CH 3D 6G System RTF RC Helicopter

Thanks for your express shipping and delivery! The package is packed very well, it is amazing without any damage from international freight. This micro cp heli is very stable flight for 3d learning. I bind it with my Futaba transmitter . I felt much better than the nano cpx. I will buy more from you.

Have fun It's hard to fly, I can not leave the ground easily. The challenge of driving such a complex helicopter makes the experiment interesting. I hope I can do better.

Considering the size and the price, I am a bit skeptical. The waiting time is longer than I admire, but after receiving it, I was impressed with the packaging of all the components, wow, real, heavy, color printed boxes for each component (transmitters, helicopters and spare parts boxes) ). It can and is used to store and transport models. Although it is new to the helicopter, this configuration is ready to fly out of the box. This configuration is robust and extremely durable. It does not fly helicopters like all the other cheap "toys". If you want a real helicopter to show you some of the larger models at the entry price, then buy a .Gregg.

I have a lot of 3.7v 260 mah batteries, suitable for this helicopter, so I gave it a lens, I mean the price, you get a professional style TX, 3d 6g, 6 channels, acceleration control, double speed, inactive, helicopter is free of ailerons 3 servo, battery of 250 hp, good power and speed, total final control and adjustment of all parameters, this transmitter is also compatible with several other aircraft, very good range (configuration of 2.4 GHz) is very easy Modify the extension range of the TX and RX antenna, and even add a 2.4 GHz cable signal amplifier to the X6 transmitter. If your welding technology meets the standard for adding SMA connectors to the transmitter housing, everything I have below 100. Dollar At this price, I bought another BNF (bundle and steering wheel), in case you need pieces of spare or if this was not repaired, I got the same shopkeeper's price below $ 55. Fly very well with the breeze, it is easy to control, has some power, climbs, it is not the fastest in the world, but it will achieve . The fly flies over 100 feet, and sometimes I can not even see it behind the tree. 2.4 ghz radio waves do not like obstacles, the wavelength is very short, but this transmitter has a good power to penetrate some things, k100 will definitely fly very high. It is a great machine and very funny, it is not the craziest thing in the world that I have flown, but I want to give it a total value of 5 stars. Update: Today is my first day, but I know it will get dark sooner or later, but after removing the plastic nose, I realized that there is an alternative receiver channel. So I used a suitable 2-pin connector, I did not need the 3 pins and I used the battery voltage through the channel to feed the white front LED behind the nose, followed by a red LED. I have to try it tonight to see what's going on. Update: The night flight of the previous night, the lighting configuration that I built was very bright. Yesterday I lost two tail rotation accessories, destroyed a main blade, burned an engine, stuck it to a tree and tried to extinguish it. It was wrapped around a pile of leaves. This device has no protection against overloads. It is difficult to find the right engine for this helicopter. I replaced the engine with another engine. The helicopter did not even lift off the ground and was suspended. It looks like a motor burned and has no protection. I also cook the receiver plate because I took the same replacement motor and put it on me. The second K100, tied to him, took off very fast. Ok, now I have many spare parts, except the receiver, but last night I did a very high dive (with a tone of 125%) and did not crush it fast enough, it is not very good for the helicopter parts, but the main reason is that the blade has a connecting rod that can move it like a spoiler, which bends the two blades down, so the servo system gets stuck. I leaned back without problems, I think I had to use my second set of pieces, but it worked very well. I changed my lighting configuration last night. I do not use 5mm white LEDs and 5mm red LEDs. Each bulb has a resistance. I use a 3mm white LED and a 3mm blue LED. Both bulbs have a resistance, so they are brighter, the lighting settings. The weight is much lower than before. The use of 2 LED bulbs, welding, cables, heat shrink tubes, plastic connectors ... does not seem to be much, but for helicopters that are already very light, this is enough to affect their performance. Anyway, it does not have the fastest height, but the pitch is 125% stupid, it seems that the helicopter is almost vertical, it is immersed in hardcore. I'm terrible when I use 3D mode, you can flip it and fly at a crazy angle. I've seen other people do this and use the accelerator to keep pushing the helicopter, and it's the other way around, a bit confusing, but it's only the second day that I used this helicopter. Hopefully today you do not have to break the part.

This came in a great box..All parts included with heli and trasmitter manuals ..Looks great ..!