Original Flysky FS-i6s 2.4G 10CH AFHDS 2A Touchscreen Transmitter with FS-iA6B 6CH Receiver for RC Airplane Helicopter Multicopter

This is the best money so far. Also, I did not see anything that said I had a friction plate. I can not explain how happy I was to see her in the package. Thank you!

This is a very junior transmitter. The throttle stick will remain the same unless you remove the spring from the lever. The controller must be disassembled and carefully removed. Not difficult to do. Things are well combined and lucky to get the receiver. I want to be a good holder of my mobile phone, although I am very happy.

Very good first controller for amateurs to enter the sport....simple but looks pretty, with rx is also easy to bind... there are many switches and two bottoms on the back Both tops have two centering dials.

Most of the problems people use with this transmitter on youtube are fixed in the latest firmware version. I like the look and feel of it.

I bought the correct range of 1000 meters. Very easy to control and comfortable to hold. I think that this configuration is very simple and will end in a second. It also looks good, I like this design, but it does not have the usual switches used by the sensors to adjust the settings on the joystick, depending on how you want to program your remote control. There are two activation buttons on the back of the remote control, which you can also program. This is the second pair of transmitters / receivers that I have configured, and I recommend to anyone who enters this hobby. The only change I made to the controller was to move the spring to the accelerator so that it does not focus automatically (acceleration), the yaw is always automatically centered. Your drone also has a battery alarm and I always recommend adding a buzzer.