ANYCUBIC 4Max Pro 2.0 Desktop 3D Printer Fully Enclosed Machine 270x210x190mm Build Volume Ultra-Silent Printing with 3.5 Inch Touchscreen Ultrabase Platform Meanwell Power Supply 500g PLA Sample Filament Support Resume Printing Filament Detector Works with PLA ABS TPU

they start off the unit was very well packaged and the manual to start up everything was very straightforward and easy. took me roughly 5 to 10 minutes to get all set up and ready to go. The process to level the bed was quite easy only took 2 minutes even include a basic USB thumb drive so I could do a test print. from unboxing to print only to 15 minutes. the print roughly took 4 and 1/2 hours but overall it was a nice little cube and then I used the washing curing station with additional 30 minutes to finish it and it came out quite well. The printer is well built it's just some learning curves if you want to learn something new compared to FDM printers, just like the same thing as if the apprenticeship got to keep maintenance and make sure everything is well dialed in. overall the prints were quite nice and the program to use before it was also just as nice. would recommend buying additional gloves the kit only includes two sets which is roughly for one good cycle. Make sure you have the printer and a well air circulated room so the smell of the resin will not incubate and smell. would recommend this printer for any beginner that wants to get into resin printing. My only downside to unit was a touch screen which is a little bit off but if you have a stylus the touch touch screen it'll work just fine.

they start off the unit was very well packaged and the manual to start up everything was very straightforward and easy. took me roughly 5 to 10 minutes to get all set up and ready to go. The process to level the bed was quite easy only took 2 minutes even include a basic USB thumb drive so I could do a test print. from unboxing to print only to 15 minutes. the print roughly took 4 and 1/2 hours but overall it was a nice little cube and then I used the washing curing station with additional 30 minutes to finish it and it came out quite well. The printer is well built it's just some learning curves if you want to learn something new compared to FDM printers, just like the same thing as if the apprenticeship got to keep maintenance and make sure everything is well dialed in. overall the prints were quite nice and the program to use before it was also just as nice. would recommend buying additional gloves the kit only includes two sets which is roughly for one good cycle. Make sure you have the printer and a well air circulated room so the smell of the resin will not incubate and smell. would recommend this printer for any beginner that wants to get into resin printing. My only downside to unit was a touch screen which is a little bit off but if you have a stylus the touch touch screen it'll work just fine.

So after waiting a month for the printer to show up I finally am able to print. The product was smaller than expected but overall good build quality. The set up was simple and quick. I do want to warn you to not remove the sticker on the cover as I did... I got it set up and the slicing software installed. I printed the Pikachu first and loved the quality I had printed at. The setting on the slicing software needs to be adjusted but it's not too difficult to adjust to your needs. Then I begin painting my miniatures. The product holds up beautifully and is currently finishing up a thirteen-hour print. I would recommend this to anyone who is beginning to 3d print or those who want to print miniatures

So after waiting a month for the printer to show up I finally am able to print. The product was smaller than expected but overall good build quality. The set up was simple and quick. I do want to warn you to not remove the sticker on the cover as I did... I got it set up and the slicing software installed. I printed the Pikachu first and loved the quality I had printed at. The setting on the slicing software needs to be adjusted but it's not too difficult to adjust to your needs. Then I begin painting my miniatures. The product holds up beautifully and is currently finishing up a thirteen-hour print. I would recommend this to anyone who is beginning to 3d print or those who want to print miniatures

The machine was printing within 30 mins of arriving at my house. The instructions are great. You will need to purchase resin for the machine and I HIGLY recommend the any cubic gray by far the best resin I have used to date. I would 100% purchase this over any other low-cost machines. It is crazy that resin printing is cheaper then fdm now. definitely still better as well.