US$379.99
=1" [text]="pdbList[currSku.listingId]['whouse'][currSku.whouse]['symbol']+pdbList[currSku.listingId]['whouse'][currSku.whouse]['origprice']"> US$469.0
=1"> 19%OFF
{{title}}
{{description}}Note: Those shipping costs are only estimates; the actual shipping cost will be shown on the order page.
I've had this printer a little over a week now and have done several prints. Took an hour to assemble and level. I did like the sensor it included for leveling. You snug it over the extruder nozzle and adjust the bed accordingly. Once a certain amount of pressure is placed on it, it issues a beep telling you to stop. Keep rotating through the corners until they are all level and you are done. After I leveled it, I checked it with my sparkplug gap tool and it was spot on. The first test print of the pair of owls turned out great with no noticeable flaws. I then printed out "The Child" from The Mandalorian and was extremely pleased with that. Both were done in Gray PLA. I then switched over to a black PLA+ and couldn't get it to stick. I tried different bed and extruder temps with no luck. I checked the levelness and was still good. I moved on to a clear PLA and have made several prints with that having no issues. I looked up the brand of PLA+ I was trying to use and saw many people have had issues with it sticking across a multitude of printers so if you have concerns about the printer, try another spool of PLA from a different manufacturer first before returning the printer. Not all manufacturers use the same exact materials in their PLA and even the color can make a difference. Most of the time it's trial and error with the temperatures. I found the the touch interface easy to use and intuitive. If you are looking for a solid printer at a great price point with a large build surface, I would definitely recommend this printer. I have absolutely zero regrets. I cannot speak one way or the other about tech support as at this point, I've had no reason to contact them. I hope you find this useful.